Ryan Henders
The Importance of A Dust Collector For Woodworkers
It’s wonderful to have a hobby that you really enjoy and especially if you can make it profitable as well. This should never be done however at the risk of your health. Naturally, you need to take all of the safety precautions necessary when using your tools and equipment. You need to ensure that your work area is a safe environment to protect from accidents. To go even further to this though you have to be certain that you are not being exposed to certain chemicals and pollutants. This is a fairly high risk in the woodworking hobby. One of the most common but perhaps least thought of is the dust. Predominantly sawdust but dust in general can be an issue.
So what steps can you take to handle the dust issue? There are a few options open to you. Ideally, though if you are working at your woodworking hobby a good deal of the time you may want to consider devising or purchasing some type of dust collection system.
There is always the option of wearing a respirator, which everyone should when they are working on their projects. The problem is as soon as they are through with the heavy cutting they remove the respirator but much of the dust is still present in the air and being inhaled. These types of problems that can be caused from inhaling that type of dust may not show up heath wise to later on down the road. By this time it?s too late, and many seasoned woodworkers suffer with respiratory problems as a result of this.
In many wood shops, you will find the shop vac type of vacuums, which are certainly a necessity, but they are more for cleaning up the debris that can seen. You may find it well worth you while to check out some of dust collection systems that are now on the market. Don?t be deceived into thinking that you have to have some big heavy cumbersome unit running all day while you are working. You can use a portable dust collector. These are just situated near where you are working and they consist of a hood that gathers the dust into a bag.
They are a great commodity because they can be hooked onto your power tools with a 4-inch port connector. If you feel that, the portable unit is just not strong enough for the type of work you are doing or there are more than one of you working in the workshop at the same time you may want to try a more centralized system. This type of unit drives the dust and sanding and cutting residues into a micron bag. To become even more elite you and go with one of the cyclone dust collector systems.
You must understand though reference to a dust collector is mostly referring to the collection of the residue of your work such as the wood chips, shavings and sawdust. It really is not addressing those fine particles that are floating around in the air. This is where the respirator is necessary
Learn How To Bend Wood Easily – Woodworking Plans
How many times have you gone and purchased a piece of wood and got it home and cursed it because it has a bend it in. Then as you move along into your woodworking hobby, you discover that there are times that; you wish you could bend the wood. Well actually, you can and there are a few methods not all that difficult to do to help you achieve this. There are methods such steam bending or microwave steaming. Then there are Kerf cut bending or laminated wood bending, so you can see there are a few options ahead of you.
Don?t even think about attempting to bend wood without a form. When you have removed the treated wood from the steam box you need to get it clamped into place as quickly as possible and that?s where the form comes into play. You can easily make your own forms with several layers of MDF.
Now let?s look at micro waving wood. Naturally you aren?t going to get a big piece of wood into your microwave so this is just for small pieces. Wrap the piecedin a wet paper towel and nuke it for only a few seconds. It works just like a steam box. You will have to experiment with the time because of the variations in the wood.
The most tried and true method for wood bending is the steam method. You will need to make a steam box so you need a heat source, a container to hold the water, which is going to be heated, and a hose for the steam to pass through. A separate box is needed for the wood that is going to be treated. For your heat source it doesn?t have to be anything elaborate it cane even be a hot plate. Nothing with open flames though. A teakettle makes a great water container but you have to be able to modify it so you can add a hose to it.
For the steam box, you can use any type of pipe or wooden box that you construct yourself. The steam has to be able to escape though or you will end up with an explosion. You must be very careful not to get burnt when doing this the steam is extremely hot and heats up everything. Make sure you wear gloves. Again making sure that you, steam has a way of escaping you can start off with about an hour of this treatment; you may need more again depending on the variation of the wood.
Laminated wood is much easier to bend because of its thickness. You will need the form but not the other equipment. Make sure the piece you are bending is longer than you need and it must be thin. Then you just glue the layers together as you stack them in the form and clamp them. Once dry trim the edges.
Kerf cut bending is just a simple procedure of cutting slots across the wood. These are done on the inside of the bend.
.
Build A Garden Shed Easily In Your Backyard
Years ago, garden decor used to consist of putting in some exquisite flower gardens then setting up a small umbrella tables and few chairs to sit and relax in. This is far from the case now with most people no matter how small their back yard is. Many people have adopted to the fashion of extending your indoors to outdoors. So now, many living rooms for illustration flow out onto the patio with the couches, loveseats and most any other furniture you would find in the living room. This has called for more broad grooming to the common architecture of the backyard itself. There are many things you can do to enhance the ambience that you have made here in your backyard.
alt="MyShedPlans Banner 403 186" border="0">
Making little flower rooms in your garden is a wonder touch. It just means having pathways or walkways leading to various segments of your backyard that are little stand-alone areas. You can create these walkways with cobblestones or bricks. You can even use wood chips or stone. Build your walkway in accordance with the size of your workspace. If it?s small then go with smaller paths.
One of the newer additions to the garden is mirrors. These work extremely well if you have a very small backyard or one that has a lot of shade. You can position the mirror so it reflects sun to the shadowed areas. It also makes your flower gardens look twice as big. Be careful where you situate the mirrors though because they are breakable and you don?t want something hitting them during a storm perhaps.
A pond and or fountain add tranquility to your outdoors. There is nothing more soothing than the sound of water slowly running over some rocks. Then if you have a pond, you can consider having some gold fish in it to enjoy watching. In any event, you must keep the water treated so it doesn?t become stagnant and a breeding ground for mosquitoes. If maintained properly it?s no different than your swimming pool. You must keep the water clean. Once you have decided that a pond or fountain is a good idea you will find many simple plans for installing or building one.
Pergola?s trellis?s and garden gates all add to the d?cor of the yard and are added extras or final changes. They are magnificent when climbing roses are allowed to grow over them. You can once again build these yourself or buy kits that you just need to assemble.
In all likeliness, you are going to have to have a storage shed especially when you have a lot of garden tools. This is one area you do not what to skimp on the cost. You not only want one that is durable but you need one that is going to fit in with the ambience of your outdoor space. Be sure to choose something that is going to stay within the d?cor of the area where you will be placing it. Choose this place wisely. You want it easily accessible but not so, it stands out more than the rest of the garden d?cor.
Sponsors
 |
 |